Jeld-wen JMI002 Double-Hung Sash Replacement Kits Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Jeld-wen JMI002 Double-Hung Sash Replacement Kits herunter. JELD-WEN JMI002 Double-Hung Sash Replacement Kits User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
MEASUREMENT GUIDE
for Double-Hung Sash Replacement Kits (JMI002)
Thank you for choosing a JELD-WEN Wood or Clad Wood Double-Hung Sash Replacement Kit. Please read this document fully before beginning.
Consult your local building code ofcial for applicable codes and regulations (particularly regarding minimum egress requirements). The installation
of a replacement window will not eliminate installation or maintenance problems with an existing window. Problems such as wood decay and
water leaks around the existing frame must be investigated and xed prior to installing replacement sashes. Windows produced to user specied
dimensions cannot be returned. Be sure the provided measurements are correct.
• Aminimum33/8"widejambdepth(“opening”)mustexistfor
replacementjambliners).
• Iftheexistingwindowsillisnotlevel,oriftheexistingwindowisnot
squareandplumb,installationmaybecomplicatedandadditionaltrim
work may be needed during installation. Consider professional installation
assistance.
• Usetheworksheetonthebacktorecordmeasurementsforeachwindow
tobereplaced.Useadditionalcopiesasneededformorewindows.
• Recordeachwindow’slocationinthehouseontheworksheetinamanner
that clearly identies it.
• Ifthereismorethan1/8"deviationwithineachsetofmeasurements,
investigate the cause and seek professional assistance to correct problems.
• Performallmeasurementsoneachwindowbeforegoingtothenext
window.
• Individuallymeasureeachexistingwindowtobereplaced.Donotassume
similar looking windows are exactly the same size.
• Measureaccurately,tothenearest1/8".
IMPORTANTINFORMATION
•Measurethewidthbetween
thesidejambs(woodsurfaceto
wood surface) in three places:
top,middleandbottom.
•Temporarilyremovejamb
liners if necessary and avoid
anystops,weatherstrip,
balancecords,pulleys,etc.
•Recordyourmeasurements.
MEASURETHEWIDTH
1
CONFIRMSQUARENESS
OFEXISTINGWINDOW
3
•Conrmtheexisting
window is square by
measuring both diagonals.
If the two diagonal
measurements differ by
morethan1/4",anout-of-
squareadjustmentinthe
width of the window must
be made.
•Theadjustmentis
determined by creating
a plumb line (using a
level) from each corner to
thesillorhead.Usinga
plumb line that falls within
thewindowopening,
measure the out of square
adjustment.
•Subtractthismeasurement
from the smallest width
measurement. Record
thisadjustedwidthasthe
smallest width.
MEASURETHEHEIGHT
2
•Slightlyopenbothsashes
and thread the tape measure
between the sashes.
•Atthetop,measuredirectly
fromtheheadjamb,avoiding
anystops,weatherstripand
liners.
•Atthesill,measuretothe
top of the sloped sill on the
exterior side of the lower sash.
•Measuretheheightattheleft
side,middleandrightside.
•Recordyourmeasurementson
the attached worksheet.
Adjustment
Head
Sill
Wood side
jamb
Wood side
jamb
Interior stop
Parting stop
Exterior stop
Jamb depth
min.33/8"
Measuring
locations
Head
stop
Head
jamb
Upper
sash
Exterior
Lower
sash
Sloped
sill
Measure
between
sashes
Measuring
locations
JELD-WEN reserves the right to change product specications without notice. Please check our Web site, www.jeld-wen.com for current information.
©2011 JELD-WEN, inc. | JELD-WEN and Reliability for Real Life are trademarks or registered trademarks of JELD-WEN, inc., Oregon, USA.
Head
Sill
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1

MEASUREMENT GUIDEfor Double-Hung Sash Replacement Kits (JMI002)Thank you for choosing a JELD-WEN Wood or Clad Wood Double-Hung Sash Replacement Kit. P

Seite 2 - MEASUREMENT WORKSHEET

ADDITIONALOPTIONSTOBECONSIDEREDBe prepared to discuss the following about your order with your dealer:MEASUREMENT WORKSHEETfor Double-Hung Sash Re

Kommentare zu diesen Handbüchern

Keine Kommentare