Jeld-wen JII024 Wood/Clad Wood Windows with Exterior Trim o Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

for Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)

Newer construction methods have led to an increase in air and water

tightness in buildings. This frequently leads to negative air pressure

inside the home, which can draw water through very small openings.

Our installation method integrates the window with the weather

barrier of the structure (typically building wrap).

Thank you for selecting JELD-WEN products. Attached are

JELD-WEN’s recommended installation instructions for metal clad

wood windows with nailing n or primed wood windows with

exterior trim. While the use of these installation instructions

is recommended, installation in strict compliance with AAMA

specications (2400-02) is an alternate method of installation and

will not affect the JELD-WEN limited warranty.

Not all window types may be installed into every wall condition in all

areas. Consult your local building code ofcial for applicable building

codes and regulations. Local building code requirements supersede

recommended installation instructions.

Please Note! These instructions do not apply to bow and bay windows

and apply only to windows with a horizontal at sill. Installations

where the sill is higher than 35 feet above ground level, or any product

installation into a wall condition not specically addressed in these

instructions must be designed by an architect or structural engineer.

Failure to install windows into square, level, and plumb openings could

result in denial of warranty claims for operational or performance

problems.

Note to Installer: Provide a copy of these instructions to the building

owner. By installing this product, you acknowledge the terms and

conditions of the limited product warranty as part of the terms of the

sale.

IMPORTANT INFORMATION AND GLOSSARY

ROUGH OPENINGS

GLOSSARY

Applied Nailing Fin

A mechanically attached vinyl n that creates a ange around the

perimeter of the window and is used to attach the window to the

rough opening.

Buck

A wood framework attached to the masonry inside a window or patio

door rough opening.

Integral Nailing Fin

A n that is part of the extruded aluminum cladding and used to attach

the window to the rough opening.

Masonry Clip

A galvanized metal strap that secures the window to the structure.

Mulled Unit

Two or more window units structurally joined together.

Precast Sill

A pre-formed concrete block placed in the sill of a masonry/block wall

to support a window.

Shiplap

The layering method in which each layer overlaps the layer below it so

that water runs down the outside.

Estimated Install

Time for New

Construction

First Time: 4.0 hr.

Experienced: 2.5 hr.

Professional: 1.5 hr.

8 4

7 5

Buck

Sheathed Wall

This installation guide specically addresses masonry/block wall,

sheathed wall and open-stud construction.

MASONRY/BLOCK WALL CONSTRUCTION

This installation assumes that

a framework of studs (often

called a buck) has already been

properly fastened and sealed to

the concrete/masonry wall by a

building professional.

FULLY SHEATHED WALL CONSTRUCTION

The wall framing is covered by sheathing. Windows will be mounted

ush against the sheathing. This installation assumes building wrap is

properly installed prior to installation.

OPEN-STUD CONSTRUCTION

The wall framing must be

covered by backing support

before the window can be

installed. The window will be

mounted with the nailing n/

exterior trim ush against the

applied backing support.

This backing support should be a

non water-degradable, thin (max.

1/8" thick) sheet material such

as vinyl sheeting. Completely

surround the rough opening with

the backing support. Backing support must be applied before building

wrap.

Trimmer

studs

Header

Sheathing

King

stud

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - ROUGH OPENINGS

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)Newer construction methods have led to an increase in air a

Seite 2 - NEEDED MATERIALS & TOOLS

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)2SAFETY & HANDLINGSAFETY• Read and fully understand ALL

Seite 3 - PREPARE BUCK

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)3INSPECT ROUGH OPENING2Verify Square, Level, & PlumbABD

Seite 4 - PREPARE STUD-FRAMED WALL

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)4PREPARE STUD-FRAMED WALL445°FOR RETROFIT INSTALLATIONSAfte

Seite 5 - INSTALL WINDOW

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)5PREPARE WINDOW5SEPARATELY SUPPLIED DRIP CAP SEAL WINDOW Th

Seite 6 - INSTALL WINDOW - CONTINUED

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)6INSTALL WINDOW - CONTINUED6APPLY DRIP CAP TO WINDOWS WITH

Seite 7 - COMPLETE INSTALLATION

INSTALLATION INSTRUCTIONSfor Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)7SealantCOMPLETE INSTALLATION81. Release the building wrap

Kommentare zu diesen Handbüchern

Keine Kommentare

Jeld-wen JII024 Wood/Clad Wood Windows with Exterior Trim o Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Jeld-wen JII024 Wood/Clad Wood Windows with Exterior Trim o herunter. JELD-WEN JII024 Wood/Clad Wood Windows with Exterior Trim or Nail Fin User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Jeld-wen JII024 Wood/Clad Wood Windows with Exterior Trim o